How to Decide If You Should Install a Home EV Charging Station
How we travel from one location to another is evolving at the same breakneck pace as the rest of the planet. Electric vehicles have increasingly appeared on the road over the past several years. Electric cars are here to stay; if you haven’t already, consider getting one. This article will assist EV (electric vehicle) owners in setting up a home charging station.
Definition of a charging station for electric vehicles
An electric car charging station is a stationary electrical outlet for recharging electric vehicles, such as those kept in a garage or driveway. If you’ve decided to invest in an electric vehicle charging station, you must have a firm grasp on the many models available before scheduling an installation. Even though there are three charging levels, only two are practical for residential usage. For this reason, the third and maximum charging level is exclusively reserved for commercial and industrial applications.
Power Supply for Use with Devices Operating at Level One
This is the typical charger for electric vehicles; it uses a regular three-pronged wall socket. While Level-One chargers don’t require any setup, they only charge slowly. Because it can take up to 20 hours to fully recharge your vehicle’s battery with one of these chargers, it is recommended that you plug it in while you sleep.
Charger – Level 2
When using a Level 2 charger, a dedicated 240-volt circuit is needed due to the higher power output. If you want one of these in your garage or driveway, you should have a qualified expert do the installation. Level-two chargers are substantially quicker than level-one chargers, with most able to fully charge your automobile in roughly 3 hours. Sales of electric vehicles increasingly come with such chargers pre-installed.
We recommend examining this information to select your ideal electric car charger. Your decision will be influenced by your financial constraints and how frequently you need to charge your EV.
What Are the Benefits of Having an Electric Vehicle Charging Station in Your Garage?
Many electric car owners charge most of their car’s battery at home. Residential charging has proven to be an economical and easy means of fueling electric automobiles. Compared to unpredictable fuel pricing, a home charging station is a much more cost-effective means of powering cars.
A full charge for an electric vehicle with a 200-mile range would cost around $9 if the national average cost per kWh were 13 cents. Depending on the electric car you’re driving, and how far you drive daily, your monthly payment may come out lower than it costs to cool your home with an AC. On top of that, there are financial incentives for getting a charging station built. Take advantage of considerable utility savings and rebates that will go a long way towards making the installation reasonable.
The possibility of expanding is another compelling argument in favor of setting up a charging station. If you already have one charging station, adding a second one is only necessary if you want to charge two vehicles simultaneously.
Putting up a Charging Station for Electric Vehicles
Earlier, we established that most EVs ship with a Level 1 charger—just a regular wire and outlet. Again, these chargers may be plugged into any standard 120V power socket but charge painfully slowly. This is why many EV owners buy a Level 2 charger, even if it’s a bit more complicated to set up.
Putting up a Level 2 EV charger is a significantly more complicated operation. It is highly advised that you get the advice of a reliable local electrician before beginning the installation process.
An experienced electrician can evaluate your home’s wiring and plug options to determine what needs to be done to ensure secure installation and proper operation. This will help prevent any electrical fires from starting in your house.
More Things to Think About Before Putting Up an Electric Vehicle Charging Station
Here are three things to think about before setting up your electric vehicle charging station:
Measurements of the Circuit:
When determining the size of the charging station, you’ll need to consider the ampacity of your electrical circuit. If your charging station uses more than 80 per cent of your circuit’s capacity, the breaker may trip. It is more efficient to charge at a lower rate.
Not only is the voltage significant, but the amperage is crucial. Different manufacturers provide Level 2 chargers with varying amperages. Most hybrids and tiny EVs can function with the lower amperages, but if you need a higher charging pace, you’ll need at least 40 to 50 amps.
Location: Think about the length of the rope. Think about the size of your wire and your car’s charging connection establishment before deciding whether to install your charging station in the garage or the driveway.
Get in touch with reputable electricians in your area.
Professional electric vehicle charger installations are something we’ve done before. Just give Add On Electric a call or head over to our website’s contact page to schedule an appointment for electric vehicle charging station installation or maintenance. After inspecting your property, we’ll be able to give you a variety of options from which to choose.