Albuquerque Whole House Surge Protection Explained and Why Your Home Needs It
Lightning strikes, blown transformers, or fallen power lines are generally the first things that spring to mind when one thinks about power surges. However, these more spectacular exterior high-voltage surge occurrences, although still posing a risk to your property, are a hazard that is less likely to occur.
This article outlines the measures you may take to protect your house if there is a spike in the electrical current.
To determine whether investing in whole house surge protection is worthwhile, you must first calculate the likelihood of surge damage and the possible cost of such damage, then compare those numbers to the cost of protecting your home against surges.
To begin, it is helpful to understand what power surges and spikes are, how they occur, and what kind of damage they can cause inside a house.
What exactly are power surges, though?
Power surges occur when the voltage going through electrical circuits experiences rapid increases that exceed the capacity the circuit intended to sustain. The standard voltage for US outlets is 120 volts; even though they can typically handle a bit more, exceeding that limit causes the outlets to become damaged.
The amount of damage produced by a surge or spike is directly proportional to the amount of extra voltage present in the circuit and the length of time that the excess voltage is there.
A surge continues for far longer than a spike does, but in any instance, we are only talking about a few nanoseconds.
What are the sources of harm caused by power surges?
-It is highly typical for smaller-scale surges to be created within your house, making them a cause of harm to your equipment and a problem in contemporary homes that are increasingly full of complex, smart appliances and electronics. (Also, with components that are becoming progressively more costly and delicate).
Many of the surges that cause damage to your devices and appliances are caused by thermostatically controlled appliances like ovens, refrigerators, or air conditioners that turn on and off frequently and are connected directly to your home’s service panel. These appliances are the most common culprits.
When electronic components are subjected to either a significant power surge or a steady stream of smaller surges or spikes over an extended period, they suffer wear and tear and eventually stop functioning properly.
Your electronics will have a shorter lifespan, you will have to repair them more frequently, and your expenditures will increase if you do not have surge protection since these tiny undetectable surges go undetected until it is too late.
Valuable data or photographs might be lost from damaged discs.
Analyzing the Risk of the Investment in Surge Protection
The Factor in Charge of Multiplication
The more appliances you have controlled by a thermostat, the higher the risk of experiencing power surges and spikes.
To get a better idea of how much is at risk and how likely surges will cause damage, count the number of appliances and other devices hooked into your system and determine how much it would cost to repair all those items.
Your potential replacement expenses will increase proportionately with the number of plugged-in electrical devices that do not have surge protection.
– Wiring and grounding – Another aspect that might put you at risk is the state of your wiring and the amount of weight it can support.
Copper is used in modern wiring, which makes it more dependable. (Be sure to check out our most recent piece on the safe use of aluminum wire here.) if you still have outdated aluminum wire, there is a greater potential for damage to your electronic devices and increased fire danger.
A crucial first line of defense against potentially harmful electrical occurrences is grounding.
The failure to have a professional ground your house is a significant surge risk factor that also enhances the possibility of damage from lightning strikes, whether they hit close or directly. If your house is not properly grounded, there will be nowhere for a significant voltage spike to go.
Because whole-house surge protection is effective because it detects and redirects incoming excess power to the home’s grounding, proper grounding is required before installing whole-house surge protection.
If you are unsure about the grounding in your house, the trained electricians we employ can assist in evaluating the issue for you.
Because the weather in Albuquerque may range from bitterly cold in the winter to swelteringly hot and muggy in the summer, residents must have access to efficient heating and cooling systems. Heating, ventilation, and air conditioning (HVAC) systems that run efficiently include an automated thermostatic control.
These units often turn on and off to maintain the proper temperature. Because of this, the flow of electricity is disrupted, which in turn causes several minor surges and spikes.
When evaluating surge protection, it is important to consider that our twin cities are prone to frequent snowstorms and thunderstorms, both of which can damage transformers and create power outages. These are additional risk variables to consider.
– Making your decision on an investment in whole home surge protection – The cost of installing whole house surge protection is an investment that slightly exceeds the cost of a higher-end laptop computer. This kind of surge protection monitors and avoids surge attacks, therefore maintaining the safety of your house and shielding your appliances, gadgets, and data from harm.
It is assured that you will get a return on your investment.
-If you don’t have it, your electronic devices are vulnerable to a continuous assault from undetected little surges and spikes, which cause damage that your insurance coverage won’t cover.
An experienced electrician should evaluate the more technical dangers, such as the condition of your home’s wiring and grounding, and then recommend and install the type of surge protection most appropriate for your property.
Installing whole-house surge protectors is simple and only takes a few minutes because they are linked directly to your home’s service panel. There won’t be much of a disturbance.
To save money, you may have considered outlet plug-in surge protectors as an alternative to whole-house surge protectors. However, this will not provide your home with enough protection against electrical surges.
The fact that many larger appliances connect directly to the system and do not have outlets is one of the reasons for this.
One other advantage is that, in contrast to whole-house surge protection systems, which just redirect excess electricity, plug-in protectors absorb it. However, their capacity to absorb is limited, decreasing with each wave passing through.
Plug-in surge protection strips cannot manage more powerful surges.
In the best-case scenario, you will have high-quality surge protection comprised of many layers, particularly if you have a lot of pricey electrical equipment and appliances.
Give us a call now at 505-804-9534, and we’ll schedule an appointment for you with one of our experienced electricians who can assist you in determining the level of danger in your house and advise you on the most effective ways to safeguard it against electrical surges. Add On Electric is here to assist you if you have found our website by searching the internet for terms such as “electrician near me” or “Albuquerque whole home surge protection electricians.