ADD ON ELECTRIC | 505-804-9534

TAP TO CALL
Home » Electrical Safety Tips » Albuquerque Electrical Safety Tips Every Homeowner Needs to Know

Albuquerque Electrical Safety Tips Every Homeowner Needs to Know

Albuquerque Electrical Safety Tips Every Homeowner Needs to Know by Add On Electric

Modern life relies heavily on electricity. It’s harmful if you don’t respect it. If you’re concerned about electrical safety, here are ten things to keep in mind:

Always Turn Off the Electricity

Before you begin any work, you should check to be sure the power is out. For any electrical problems, always turn off the breaker box first. After that, connect a device, turn the switch, and test it with a tester. Just turn off the electricity for a few seconds to check the circuit.

Make sure you have the proper fire extinguisher at hand.

Never use water to put out an electrical blaze. Water can be a severe shock threat for individuals trying to put out an electrical fire. Sediment in water acts as a conductor of electricity. Avoid the use of water and opt for an electrical fire extinguisher instead.

Use multiple outlets.

No, I don’t have an outlet that can handle more than two devices. You’re most likely using an outlet strip, which is a dangerous configuration. To avoid overloading one socket, spread out your small appliances and electrical gadgets over a few different locations. Instead, you may have an electrician install more outlets there.

Be Aware of Your Outlets.

Feel the outlets around your house from time to time. To the touch, they should all be ice cold. If you discover a warm or hot outlet, immediately turn off the circuit breaker and call a professional electrician. When it comes to electrical problems, you don’t want to deal with them.

Make Your Outlets Child-Proof.

Install outlet covers if children are even a possible possibility in your house. Automatically closing coverings with spring-loaded latches is the most satisfactory solution.

Investigate the Flickering Lights 

Tighten the light bulb. A flashing light may indicate a problem with the fixture or the circuit. Alternatively, it might be that the bulb is loose, and there is no steady flow of power. You should call an electrician if it doesn’t work.

Install Arc Fault Circuit Breakers

Every year, the Electrical Safety Council International reports that the arc fault is responsible for more than 28,000 house fires in the United States, killing and injuring hundreds of people. Such fires can be avoided with the use of arc fault circuit interrupters. An electrician should install these in your house.

For long-term use, don’t use extension cords.

You should only use an extension cord if you require electricity in a location with no readily available outlet. The use of an extension cable should never be considered a long-term solution. There are two options here: relocate the object closer to a plug or install an extra plug where you need it.

Installing Ground Fault Circuit Interrupters is recommended.

Short circuits and insulation problems might cause a ground-fault circuit interrupter to shut off. Bathrooms and kitchens should be equipped with GFCI devices. Using this avoids electrical problems from causing fires and helps protect people from getting electrocuted.

In the event of any doubt, contact an electrician.

You can’t help but be drawn to trying to fix things around the house on your own. Electricity should be left in the hands of the experts. Unsafe shocks and fires can be caused by wiring that has been put incorrectly. Don’t jeopardize the safety of your family and possessions. Take care of electrical problems by hiring a professional.

Post Tagged with