Phoenix Hot Tub Electrical Safety Tips to Follow
![Phoenix Hot Tub Electrical Safety Tips to Follow by Add On Electric Phoenix](https://addonelectric.com/wp-content/uploads/2022/06/Phoenix-Hot-Tub-Electrical-Safety-Tips-to-Follow-by-Add-On-Electric-Phoenix.jpg)
Phoenix hot tub safety is critical to owner and guest safety. This article focuses on electrical concerns specific to hot tubs. We are all aware that electricity and water do not mix. Spa electric risks may indeed lead to electrocution, but they can also lead to fires.
A reliable source of power
The correct power supply is a must for a spa’s safety. It is common in the United States to use 120V or 240V portable spas and hot tubs. Your GFCI breakers, outlets, and spa park gfci should all be working perfectly. Every month, make sure your GFCIs are working correctly. To make sure everything is working, all you have to do is press the Test and Reset buttons.
Plug-and-play 120V hot tubs are available. However, they must be hooked into a GFCI outlet. You can tell whether a GFCI breaker has been installed in your home’s main panel or electrical box by looking for the yellow test button. The safety of plugging it into a conventional back patio outlet may be compromised.
Larger spas require 240V power, often provided by a 50-amp circuit breaker on the main panel. Additional safety measures include an exterior cut-off box, usually installed between the main board and the hot tub, but at least 5 feet from the water, to avoid contacting it while in the hot tub water.
At least 5 feet away from the hot tub, you may need to raise the circuit amperage or, better yet, build an additional GFI breaker and outlet. If you have a GFCI outlet, you should never use an extension cable with a small spa that plugs into an outlet. 9 out of 10 times, if your 240V hot tub is tripping the breaker, the heating element is to blame. To make sure, unplug the heater and check to see whether the circuit breaker stays on.
Metal Objects in the Local Area
Look about your spa and see if there are any metal things you can reach to touch. There is a potential that they may be stimulated by something invisible and make ground with someone in the hot tub which feels it, even if they are not tied to the spa itself. Ensure there is no power source near the hot tub by inspecting any metal things. The best action is to keep all metal things out of the spa. When compared to the pictures above, how many electrical risks are there?
Easily Accessible Power Supplies
Electric outlets, outdoor lights, and other power sources should be out of the spa’s reach. Please do not bring your phone to the spa with you and leave it plugged in. Small heaters or fans placed near the spa can also help keep the temperature at a comfortable level. Make sure that nothing is connected to the hot tub’s electrical system. Instead, switch to battery-operated devices.
Grounding and bonding
The green ground screw on the load serves as the connection point for all power lines running to the electrical equipment (pump, heater, blower, etc.). This cable is routed via the breaker box to the breaker’s ground bar. An electrical short in one piece of equipment does not affect other areas of the spa since the bonding wires are made of bare copper and connected to the equipment’s outside casings (such as the pumps, heaters, blowers, and an Ozonator).
The Wiring Diagram for A Spa Package
Not getting shocked in the tub is the most prevalent electrical hazard in hot tubs and spas but being shocked under the tub is! As a former electrical engineer, I can tell you from experience that if something seems dangerous, it probably is. Insect damage, rat damage, and exposed wire terminals are some of the dangers that might occur. In some circumstances, the entire control box can be energized if the ground or bonding is wrong. If your spa pack wiring is incorrect, proceed with care and contact an electrician.
Lighting for the Spa
Remove the morning if it’s bothering you! Spa lights are self-draining sealed systems, and the low voltage (9-12 volts) of most portable spa lights means little risk of electrocution. However, spa light risks may arise if your light leaks and your GFCI fails to operate correctly or if the light is wired improperly. To conclude our discussion on hot tub electrical safety, please check around your hot tub and, if anything appears to be harmful, it most likely is.